If the IPVB Inline Power Venter is not the right size for you, the TDF Power Venter is your choice. It is available for small as well as large applications.
It can be installed inline so it is easily accessible. But adding an exit cone to the discharge, it can also be installed outside at the termination point where it ensures a mechanical draft in the entire chimney or stack system. It works well with condensing and non-condensing, gas-fired and oil-fired boilers and water heaters. It can even be used for other applications with high-temperature exhaust air such as generators, solid-fuel-fired ovens, boilers and more. Actually, the TDF has the highest temperature rating (1400°F) of any UL-listed Power Venter on the market.
Capacities | 0-29,000 CFM (450-49,300 m3/h) |
Material | Stainless Steel 316L Housing and Impeller |
Drive | Backward-curved Impeller |
Motor | EC-Motor, TEFC, Class H w/ insulated rotor/shaft system |
Max. Temp | 1400°F (760°C) |
Warranty | 2-Year Factory Warranty 10-Year Warranty Against Corrosion Perforation |
Listings | UL 378 Standard for Draft Equipment UL 705 Standard for Power Ventilators CSA3-B255-M81 Standard for Mechanical Flue Gas Exhauster CSA C22.2 No. 113-12 Fans and Ventilators, Edition 9 |
A full featured, industrial-type motor controller for indoor/outdoor use (NEMA 4X) programmed specifically to control and adjust the speed of ENERVEX fans and ventilators using Electronically Commutated (EC) Motors or Induction Motors.
A sophisticated multi-use draft and pressure controller with integrated webserver and remote access used with fans and dampers to monitor and maintain a constant pressure in commercial boiler and building applications.