Commercial Products  >  Draft Control
EDrive E3
MSC E3 Motor Controller

The MSC E3 EDrive is a full-featured, industrial-type motor controller programmed specifically to control and adjust the speed of ENERVEX fans and ventilators using single-phase and three-phase EC-Motors or Induction Motors. It can be used for indoor as well as outdoor installation without further protection.

The EDrive motor controller includes a keypad, built-in mounting brackets and a removable front cover to access control terminals. The built-in LCD display indicates various parameters including motor frequency, amperage and alarm conditions.

Features

  • Sensorless Vector Controller for EC Motors & Induction Motors
  • LCD display
  • 14 parameter basic setup.
  • Contractor style connections for simple wiring
  • Integral RFI filters
  • Full EMC compliance
  • Remote monitoring, configuration and firmware upgrade via OptiTools Suite
  • NEMA 4x (IP66)
  • 0.5 HP to 1 HP in single-phase 120VAC
  • 1 HP to 15 HP in three-phase 200 VAC
  • 1HP to 30HP in three-phase 400VAC
  • Modbus & Bluetooth connectivity

Comes pre-programmed by ENERVEX for each specific motor and is included with all BEFx, BPV and TDF models.

Specifications

Controller Capabilities Sensorless Vector Control for Permanent Magnet and Induction Motors
Programmable Parameters 14 basic
Programming OptiTools Suite
Supply Voltage 100-115VAC +/- 10%
200-240VAC +/- 10%
380-480VAC +/- 10%
Overload Capacity 150% for 60 Sec / 175% for 2.5 Sec
Typical Efficiency >98%
Operating Temperature 15°F to 120°F (-10°C to 50°C)
Keypad Built-in
Enclosure Rating NEMA 4X (IP66)
Connectivity Modbus, Bluetooth
Warranty 2 Years
EMC Directive 2004/108/EC, Cat 1 according to EN61800-3:2004
Listing Certification UL 508C

Alternate text for products sub-image

MSC E3 EDrive Motor Controller— controls and adjusts the speed of fans and ventilators
PRODUCT DOWNLOADS
COMMON COMPANION PRODUCTS
TDF Power Venter—rugged high-temperature exhaust fan
Power Venter

Ruggedly built high-temperature exhaust fan designed for inline mounting or termination mounting for small and large applications. For vertical or horizontal installation indoors or outdoors.

TDF-VP Velocity Plume Power Venter—plume dilution fan that dilutes flue gas exhaust 100% or more
Velocity Plume Power Venter

High-plume dilution power venter designed for termination mounting. For vertical or horizontal installation outdoors. Can be used in most condensing or non-condensing exhaust applications up to 1400°F.

BPV Box Power Venter—box style insulated high-temperature exhaust fan
Box Power Venter

Box style insulated, high-temperature exhaust fan designed for inline mounting or termination mounting for small and large applications. For vertical or horizontal installation indoors or outdoors.

BEF Box Fan—high-efficiency ventilator designed to reduce noise and condensation in intake and exhaust appliances
Box Fans

Multi-use centrifugal exhaust fan designed for indoor and outdoor installation. Can be used for special exhaust or exhaust of lint-laden air. Also used to supply air.