Commercial Products  >  Draft Control
EDrive
MSC Motor Controller

The MSC EDrive is a full-featured, industrial-type motor controller programmed specifically to control and adjust the speed of ENERVEX fans and ventilators using single-phase and three-phase  EC-Motors or Induction Motors.

The EDrive motor controller includes a keypad, built-in mounting brackets and a removable front cover to access control terminals. The built-in LCD display indicates various parameters including motor frequency, amperage and alarm conditions.

Features

  • Sensorless Vector Controller for EC Motors & Induction Motors
  • LCD display
  • 14 parameter basic setup.
  • Contractor style connections for simple wiring
  • Integral RFI filters
  • Full EMC compliance
  • Remote monitoring, configuration and firmware upgrade via OptiTools Suite
  • 0.5 HP to 1 HP in single-phase 120VAC
  • 1 HP to 15 HP in three-phase 200 VAC
  • 1HP to 30HP in three-phase 400VAC
  • Modbus & Bluetooth connectivity

Comes pre-programmed by ENERVEX for each specific motor and is included with all BEF and TDF models.

Specifications

Controller Capabilities Sensorless Vector Control for Permanent Magnet and Induction Motors
Programmable Parameters 14 basic
Programming OptiTools Suite
Supply Voltage 100-115VAC +/- 10%
200-240VAC +/- 10%
380-480VAC +/- 10%
Overload Capacity 150% for 60 Sec / 175% for 2.5 Sec
Typical Efficiency >98%
Operating Temperature 15°F to 120°F (-10°C to 50°C)
Keypad Built-in
Enclosure Rating NEMA 1 (IP20)
Connectivity Modbus, Bluetooth
Warranty 2 Years
EMC Directive 2004/108/EC, Cat 1 according to EN61800-3:2004
Listing Certification UL 508 

PRODUCT DOWNLOADS
COMMON COMPANION PRODUCTS
Power Venter

Ruggedly built high-temperature exhaust fan designed for inline mounting or termination mounting for small and large applications. For vertical or horizontal installation indoors or outdoors.

Inline Power Venter

A mid-range high-temperature mechanical draft fan designed for inline mounting. For vertical or horizontal installation. Used with condensing or non-condensing heating appliances.

Chimney Fan

High-temperature mechanical draft fan designed for termination mounting. For vertical or horizontal installation. Used with condensing or non-condensing heating appliances.

Box Fans

Multi-use centrifugal exhaust fan designed for indoor and outdoor installation. Can be used for special exhaust or exhaust of lint-laden air. Also used to supply air.

Air Supply Fan

Tube-axial duct fan used to supply combustion air or make-up air into mechanical rooms.